View CY7C63231A_4225081.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

CY7C632xx
Errata Revision: **
April 7, 2004 Errata Document for CY7C632xx / enCoReTM USB Low-speed USB Peripheral Controller
This document describes the errata for the enCoReTM USB Low-speed USB Periheral Controller / CY7C632xx. Details include errata trigger conditions, available workarounds, and silicon revision applicability. This document should be used to compare to the datasheet for this device to fully describe the device functionality. Please contact your local Cypress Sales Representative if you have further questions.
Part Numbers Affected
Part Number CY7C63221 CY7C63231A Device Characteristics All packages All packages
enCoReTM USB Low-speed USB Peripheral Controller Qualification Status
Product status: In Production - Qual report: 001406
enCoReTM USB Low-speed USB Peripheral Controller Errata Summary
The following table defines the errata applicability to available enCoReTM USB Low-speed USB Peripheral Controller family devices. An "X" indicates that the errata pertains to the selected device. Note: Errata titles are hyperlinked. Click on table entry to jump to description.
Items CY7C632xx Rev Letter Fix Status
1. Faulty GPIO Interrupt
X
A
No silicon fix planned.
1. Faulty GPIO Interrupt * PROBLEM DEFINITION When a falling edge interrupt is enabled for a GPIO pin, reading the GPIO Port 1 coincident to a rising edge of that GPIO signal may generate a false GPIO interrupt.
Any Port 0 or Port 1 GPIO pin with Falling Edge GPIO Interrupt Enabled
Port 1 Read Signal (See Note 1)
GPIO Interrupt Signal (See Note 2)
Proper GPIO Interrupt Trigger
False GPIO interrupt on a Rising edge
Cypress Semiconductor Corporation
*
3901 North First Street
*
San Jose
*
CA 95134
*
408-943-2600 April 2004
CY7C632xx
When a rising edge interrupt is enabled for a GPIO pin, reading the GPIO Port 1 coincident to a falling edge of that GPIO signal may generated a false GPIO intterupt
Any Port 0 or Port 1 GPIO pin with Rising Edge GPIO Interrupt Enabled
Port 1 Read Signal (See Note 1)
GPIO Interrupt Signal (See Note 2)
Proper GPIO Interrupt Trigger
False GPIO interrupt on a Falling edge
Note 1: Port 1 Read is an internal signal that is asserted when Port 1 is read with an "IORD 01h" instruction. Note 2: The GPIO Interrupt signal is an internal signal. The arrow indicates that a GPIO interrupt is triggered.
* PARAMETERS AFFECTED
Interrupts * TRIGGER CONDITION(S) Reading the GPIO Port 1 when either rising or falling edge interrupts are enabled for a GPIO pin. * SCOPE OF IMPACT The chip enters the GPIO Interrupt Service Routine (ISR) in error. * WORKAROUND Workarounds will need to be tailored to individual applications based on the flexibility of changing the GPIO usage, the timing of the GPIO interrupt sources and firmware interrupt latencies. * FIX STATUS No silicon fix is planned.
References
1. 38-08028 CY7C63221/31A enCoReTM Low-speed USB Peripheral Controller datasheet.
2
CYC7632xx
Document History Page
Document Title: CY7C632xx Rev. A Errata Document Number: 38-17016 REV. ** ECN NO. 217003 Issue Date See ECN Orig. of Change bha Initial release. Description of Change
(c) Cypress Semiconductor Corporation, 2004. The information contained herein is subject to change without notice. Cypress Semiconductor Corporation assumes no responsibility for the use of any circuitry other than circuitry embodied in a Cypress Semiconductor product. Nor does it convey or imply any license under patent or other rights. Cypress Semiconductor does not authorize its products for use as critical components in life-support systems where a malfunction or failure may reasonably be expected to result in significant injury to the user. The inclusion of Cypress Semiconductor products in life-support systems application implies that the manufacturer assumes all risk of such use and in doing so indemnifies Cypress Semiconductor against all charges.

▲Up To Search▲

Price & Availability of CY7C63231A

	To Download CY7C63231A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .